Tapeswitch® Press Releases
Latest Product News from Tapeswitch
Ideal for all types of powered gates, the PSSW wireless system offers CAT 2 or 3 safety when combined with a
Tapeswitch® sensing edge. In most gate applications there is always a problem of how you return the second lead
to the control device, with the New PSSW wireless system it’s easy. A receiver unit is mounted on the gate and the
emitter unit is mounted in a convenient place where the cable can easily be run back to the control panel.
A must-have practical- safety- solution for all powered cantilever gates. Read more ....
The VB bumper is a robust and durable sensing bumper typically used in high impact applications. It
is suitable for use on AGVs, mobile platforms, travelling conveyors and other moving equipment or
machinery. The VB bumper is designed to withstand repeated crushing impacts that would easily
destroy a conventional bumper and continue to function perfectly. Read more ....
The Blueview alignment system from Tapeswitch Ltd. is a simple but very
effective way of allowing Guardscan light curtains to be optically aligned.
In order to work reliably, the emitter and receiver units of all infrared
safety light curtains need to be optically aligned correctly. By using a
Guardscan light curtain with the Blueview alignment system anyone, even a
non-specialist, can quickly identify and correct any alignment problems and
get machinery back into production. Read more ....
PSSZ-2 Miniature Interface units
Tapeswitch have recently launched the PSSZ-2 miniature DIN-rail interface
unit which provides category 3 fail-safe monitoring for safety mats,
sensing safety edges and other ribbon-switch safety sensors. The PSSZ-2
interface unit monitors the safety sensor by using a single two-wire lead
which makes it ideal for safety applications where a connection to the
safety sensor at one end only is the most practical. The PSSZ-2 interface
unit has solid-state volt-free outputs which means that it is compatible
with virtually any interface, including the input modules of bus systems
such as AS-i. Read more ....
Panic Alarm Switch for Interview/Consulting Rooms
A NEW Panic Alarm Switch, designed specifically for installation in interview
or consulting rooms has been introduced by Tapeswitch. The DaDo Panic Alarm
Switch system is a press-at-any point switch strip that can easily be operated
by a hand or finger and is designed to act as a emergency call system to request
assistance when personnel are under threat in high risk situations. The DaDo
Panic Alarm Switch is designed to be mounted on the wall of a consultation or
interview room and can be configured to suit the shape of any room. Read more ....
TVS2 - Durable and reliable Vehicle Detection Switch
The NEW TVS2 Vehicle Switch from Tapeswitch is a highly visible, durable and
reliable road switch that is designed to detect the wheel of a vehicle. It can
be used in many signalling applications including vehicle counting, traffic
control, private road security. The TVS2 Vehicle Switch with its IP67
protection against water even allows it to be used as a signalling switch in
automatic car washes. Read more ....
Guardscan GS120 - NEW Category 3 Light Curtain
Tapeswitch Ltd announces the launch of the NEW GS120 range
of Guardscan safety light curtains. The NEW GS120 light curtain offers a
cost-effective alternative for category 3 situations, as defined by EN954-1,
where the advanced capabilities of the company's B Series light curtain
system are not required. Read more ....
Diagnostic Software Kit - B Series Light Curtains
Tapeswitch Ltd. are pleased to announce the launch of their revolutionary NEW
Diagnostic Software Kit for their range of Guardscan B Series light curtains.
The Guardscan Diagnostic Software Kit is a powerful tool, which provides
real-time information on the status of each individual beam within the B Series
light curtain. Read more ....
Guardscan B Series/Solo - The Guard For ASi-Safe
Tapeswitch's latest development of the B Series/Solo Light Curtain
is a versatile development of the highly successful Guardscan range of
B Series Light Curtains. Having volt-free outputs
built into the receiver unit rather than the more usual PNP ones it will be of particular
interest to users of ASi-Safety at Work and other safety bus systems. Read more ....
"Quick Connect" System for CKP Safety Mats
Tapeswitch Ltd are pleased to announce that their CKP/S1 Safety Mats can now be supplied factory fitted with
the industry-standard M8 connector.
This additional option provides a "quick connect" system for our CKP/S1 Safety Mats providing for rapid installation or re-organisation
of the CKP/S1 Safety Mat System.
This is of particular benefit to high-volume manufacturers for whom it is vitally important that downtime is minimised.Read more ....
